There are several reasons why Netflix won’t work on your Samsung TV. And the good news is that you can quickly fix it in a couple of minutes.

The underlying reason why Netflix is not working on your Samsung Smart TV is nothing severe.

Fix Netflix Not Working On Samsung TV

If Netflix is not working on your Samsung TV, the first thing to do is to unplug the TV and wait for 45 seconds. Now press and hold the power button for another 15 to 30 seconds to drain residual power. Directly plug your TV back in, turn it on and launch the Netflix app.

Unplug/Soft Reset TV

Soft resetting your Samsung TV is the first thing you should do if Netflix doesn’t work. It is a simple process to fix temporary software issues.

• Turn off and unplug your TV from the wall socket.
• Wait for about a minute before you do anything else
• Locate the power button on your TV and press and hold it for 30 to 60 seconds. (You must press and hold the physical power button on your TV, not the one on your remote.)
• Now release the power button and plug it back.
• Turn the TV on the power button, which should solve the issue.

Soft resetting your Samsung TV will resolve software glitch-related issues.

Once turned on, try to launch the Netflix app, which should work.

Check If Netflix Is Down

If the Netflix servers are down, then matter what you do, until the issue is fixed, you won’t be able to get Netflix working on your Samsung TV.

You can refer to two places to see the Netflix streaming service down.

Firstly, visit the official Twitter handle of Netflix Help, where they update if any ongoing issues are discovered.

Go through the latest tweets to see if the Netflix officials report an issue.

You can also reach out to them by messaging on Twitter.

The second method uses Downdetector to see if the streaming service is down. If many people are facing issues with Netflix, you’ll find some info on Downdetector.

Sometimes, the streaming service might go down due to outage issues or maintenance works. If this happens, you only have to wait until it is up.

Ensure Your Internet Is Stable

A stable Internet connection is necessary for Netflix to work on your Samsung Smart TV. If your Internet network is unstable where speed and ping fluctuate a lot, it might cause issues with the Netflix app on your TV.

To confirm everything is okay with your Internet connection, all you have to do is:

1. Open a web browser on any device connected to the same WiFi network. (Smartphone/Tablet/PC)
2. Visit fast.com or speedtest.net
3. Click the Start button and wait for a few seconds until it fetches the data
4. Your speed won’t vary much if you have a stable internet connection. Cross-check the speed you see on the test result and your Internet plan to ensure you get the promised download and upload speed.

Even if the upload speeds drop a little bit, it is okay as we need more download speed to stream content.

To stream content on Netflix on your Samsung TV without any issue, a speed range of anything above 15 to 25 Mbps will do.

You may also try opening the Netflix app on your TV after disconnecting other devices from the network if the speed is too low.

Reset Samsung TV’s Network Settings

Network reset means we restore the factory default settings for network settings. This will erase the history of all saved WiFi networks along with their password.

Once reset, you’ll need to connect to the WiFi again.

Let’s see how to reset the network on a Samsung TV:

Firstly use your TV remote to navigate, and click on the gear icon on the bottom left corner of the screen to open Settings

Click on General and then Network

Under Network, click on the option ‘Reset Network‘

A pop will ask if you want to reset your Samsung TV network. Click on Yes.

Wait for a couple of seconds for the process it complete. It takes less than 15 seconds in most cases.

Next, you need to connect to your WiFi again. On the pop that appears, click on the Network Settings button.

Select Wireless

Select the correct WiFi network from the list and enter the password to connect to it.

Once done, you are all good to go.

Ensure Samsung TV Is Running On Latest Software

Your TV must always be running on the latest software version. Otherwise, some latest apps might become incompatible with your TV. The simple solution is to update your Samsung TV’s software.

Open up the Settings section of your Samsung TV

Click on Support

Under Support, you’ll find the option ‘Software Update.’ Just click on it.

See if an update is available. If yes, follow the on-screen instruction to complete the update.

Once updated, restart your Samsung TV before launching the Netflix app.

Clear Netflix App Cache

Cache are those files stored on your Samsung TV to make it faster. But over time, many cache files get accumulated, eating up a lot of storage and sometimes causing issues with working with other apps such as Netflix.

To clear the cache on Samsung TV, open Settings and follow the steps:

1. Open Settings.
2. Click on Support on the options on the left side.
3. Click on Device Care
4. Select the Manage Storage option
5. Find the Netflix app from the list of installed apps
6. Click the Clear Cache button to delete the cache files of the Netflix app instantly

Reinstall Netflix App

Another method to fix issues where the Netflix app won’t open on Samsung TV is to reinstall the same. You can uninstall and reinstall the Netflix app to fix the problem by visiting the Samsung TV App Store.

• Go to Settings > Apps.
• Click on the gear icon from the top right corner of the screen
• Select the app that you want to uninstall. In this case Netflix.
• Click the Delete button.
• A pop might appear asking you to confirm the action. Click Yes and successfully uninstall Netflix from your Samsung TV.

Next, you need to reinstall the Netflix app on your TV.

Head to the App store and use the on-screen keyboard to type Netflix on the search bar.

Find the app from the list and click on the Install button.

Once installed, open it up, and you are good to go.

Reset Samsung Smart Hub

As the name suggests, Samsung Smart Hub is the thing that adds smart capabilities to your TV. It is where you install and manage apps, control smart elements of your TV, and more.

Resetting the Samsung Smart Hub is a simple fix for issues when Netflix won’t work on Samsung TVs.

Let’s see how to reset Samsung Smart TV:

1. Use your TV remote to open Samsung TV Settings.
2. Click on Support.
3. Select Self Diagnosis.
4. You’ll be asked to enter your TV’s pin. It would be 0000 by default unless you changed it in the past.
5. Click on Reset Smart Hub.
6. Wait till the process is completed.
7. Sign in with your account and install the Netflix app from the store.

Soft Reset WiFi Router

If your WiFi router doesn’t work correctly, it will affect your Samsung TV’s Internet connectivity.

It’s worth soft resetting your WiFi router to fix network connectivity-related problems that might be causing issues with Netflix.

To reset your WiFi router, unplug it and wait for 2 to 3 minutes. Now connect the router back again and wait some time for it to configure and connect to the network.

Once connected, try to open Netflix and see if it works.

A soft reset can resolve simple network-related issues.

You may also try changing the DNS to Google DNS or Cloudflare DNS.

Update Netflix App For Samsung TV

If you recently updated your TV OS but didn’t update the Netflix app, then it can cause software incompatibility issues. Although apps on your Samsung TV get updated automatically, it might sometimes fail.

Just go to the App store and search for Netflix. See if an update is available. If yes, update the app. If not, delete the Netflix app and reinstall it again.

Factory Reset Your Samsung TV

If none of the troubleshooting steps above worked for you, factory resetting your Samsung TV is the last thing to do.

Factory reset means switching all the settings and configuration to factory default. After the reset, your TV will be like how you unboxed it the first time.

Factory reset Samsung TV with remote.

Press the source button on your Remote and select the Settings (gear icon) options.

It will open up Samsung TV Settings. Scroll down and select General.

Click the Reset button to the last of the list.

Enter your Samsung TV’s PIN to proceed with the reset procedure. (default is 0000)

Wait for some time till it gets reset.

Get In Touch With Netflix Support

It’s also worth contacting the Netflix support team for additional help.

You have two options to get in touch with the support team:

• Website
• Phone

Directly call 000 800 040 1843 (Netflix support helpline number)

Find more details about different options to connect with Netflix support here

Netflix is pretty active on Twitter too. Also, try to contact them via Twitter (@Netflixhelps)

Why Netflix Not Working On My Samsung TV

Here are some reasons why the Netflix app won’t work on your Samsung TV.

App Compatibility Problems

If your Samsung TV is running on outdated software or the Netflix app needs to be updated, then some compatibility issues can occur. Newer apps might not work in the older version of TV software and vice versa.

So the solution here is to update Samsung TV software and use the latest version of the Netflix app on your TV.

Netflix Servers Are Down

Not that often, but at times, Netflix servers might go down. When the servers are down, people won’t be able to watch any shows on Netflix. If this is the case, we have nothing to do.

We’ll have to wait until the issue is resolved, and the Netflix servers should be up and running.

Keep an eye on their Twitter handle to get more updates.

Outdated TV Software or Netflix App

You have to ensure your Samsung TV runs on the latest software version. Head to Settings and see if an update is available. If yes, go ahead and update it right away.

Do the same with the Netflix app as well. Generally, apps on your Samsung TV get updated automatically. But, if for some reason it doesn’t, go to the app store and update the Netflix app.

Frequently Asked Questions

Wrap Up

No, you are not alone. Many people face issues with Netflix on their Samsung TVs. Netflix app not working on Samsung TV can be frustrating when you try to watch your favorite show. Hopefully, the guide above is helpful to you in fixing the issue.

Let’s quickly run down what we did to Fix the Netflix app not opening on Samsung TV:

• Soft reset your Samsung TV
• Check if the Netflix server is down
• Update Samsung TV software
• Delete Netflix app cache on Samsung TV
• Reinstall the Netflix app
• Reset network connection
• Reset Samsung Smart Hub
• Contact the Netflix support team

The post Netflix Not Working on Samsung TV (PERMANENT Fix) – 12 Fixes appeared first on IPEEWorld.

Most of the time, your Hisense TV can be easily fixed in a couple of minutes.

Let me walk you through the troubleshooting steps explained by a Hisense TV specialist.

Hisense TV Won’t Turn On

If your Hisense TV doesn’t turn, first you need to unplug the TV from the wall socket. Now press and hold the power button of your Hisense TV for 30 seconds to drain residual power. Checking the power cord connection and factory resetting can also help.

You might find yourself in a situation like:

• Hisense TV won’t turn on, but power light blinks
• The TV won’t turn on, but the red light is on
• TV has sound but no picture
• TV keeps rebooting

Whatever the issue, follow the ultimate guide below to fix your Hisense TV.

1. Reset your Hisense TV

The first thing you want to do when your Hisense TV doesn’t turn on is to power cycle it. It is a simple process by which we drain 100% power left in the TV even after turning it off.

Once the power is completely discharged, we turn it on back again to see if the issue has been solved.

Follow the steps below to learn how to power cycle Hisense TV to fix the TV not turning on problem.

• Turn off and unplug your TV from the wall socket.
• Wait for about a minute before you do anything else
• Locate the power button on your TV and press and hold it for 15 to 30 seconds. (You must press and hold the physical power button on your TV, not the one on your remote.)
• Now release the power button and plug it back.
• Turn the TV on the power button, which should solve the issue.

I turned on my Hisense TV after a quick power cycle of fewer than 2 minutes.

2. Check the Connections

One of the most basic and often missed points is that people forget to check the connection properly. It might not always be the fault of your Hisense TV.

Sometimes, the extension cord, power outlet, power cable, etc., might fail to work.

So it’s essential to check all the connections before trying other fixes.

1. Firstly, unplug the TV and wait for a couple of seconds. Connect it back and try to turn on the TV.
2. Check extension cord – If you use an extension cord to connect the TV to the wall socket, you might want to check if the extension cord is working correctly. Try connecting other devices like your mobile charger to the extension box and see if it charges your phone. Suppose it doesn’t then connect the TV directly to the wall socket or use another extension cord.
3. Unplug other appliances – If multiple devices or appliances are connected to the extension cord, you are advised to disconnect them and try turning on the TV. Sometimes, the high electricity-consuming appliances might cause issues with the TV.
4. Try a different wall socket – Sometimes, the wall socket might fail to work. Connecting your TV to another wall socket would be better to see if the Hisense TV turns on.
5. Try a different power source – If you have multiple power sources, try switching the power source.

3. Check the Wall Outlet

If you directly connect the TV to the wall outlet, you must ensure the outlet is working. If the wall outlet fails, obviously the TV won’t turn.

Try connecting a different device to the same wall outlet and see if it turns on. If it doesn’t, then the problem is with the wall outlet. In this case, you need to connect your TV to a different power outlet. Or if the device works, there’s no issue with the wall outlet.

4. Check the Input Source

All modern Hisense TVs comes with multiple input sources, including multiple HDMI, Display port, and more. You have to make sure that you selected the correct input source.

Say, for example, if you connected to HDMI port one and selected HDMI port two as the source, the TV might not display anything.

You must change the input source to the correct port in this case.

Let’s see how to check and change the input source in a Hisense TV.

How To Change Input Source Using TV Remote

1. Press the power button on the TV or remote control to turn on the TV
2. Click on the Menu or Input button to see if a menu pops up on the screen. If yes, continue following the steps given below. Otherwise, jump to the next section.
3. Click on the option which says ‘Source.’
4. Select the proper Source and see if it works

How To Change Input Source Without TV Remote

1. Turn on the TV using the power button.
2. Use the physical buttons on the TV to open the Menu and navigate.
3. Find the Source menu and select the proper input source

5. Factory Reset Hisense TV

By following the steps above, if you somehow managed to turn on the TV next, it would be ideal for resetting the TV into factory settings.

For starters, resetting a TV will change all the settings to factory defaults.

Use your TV remote and head over to Menu.

Go to Settings > Device Preferences, scroll down to the bottom, and select Reset.

Click on the Reset option again and finally select Erase Everything option.

Wait for a couple of minutes till the resetting process is one. Once done, your Hisense TV will turn on, and you’ll have to go through the entire setup process.

Factory Reset Hisense TV That Won’t Turn On (Without Remote)

If your Hisense TV won’t turn on, even for a few seconds, follow the steps below. This will work even if you don’t have the remote control.

You’ll find a reset button on the back of your Hisense TV. It’s not a proper button. There will be a small hole next to the Reset label.

All you have to do is, grab a toothpick, pen, or a simple pin and insert it into the hole. Press and hold it for a couple of seconds while the TV is plugged in.

Wait for the TV to turn, and the reset process will start. It will take several minutes for the TV to complete the reset process. Patiently wait till it’s done.

6. Low Voltage

Hisense TVs have a minimum voltage level, below which the TV ceases to turn on. If the voltage level is too low, then that might be why your Hisense is not turning on. If frequent voltage fluctuations happen in your house, then chances are, the TV won’t turn on.

If this is the case, ensure you have balanced voltage levels before you try to turn on the TV. You might want to wait for some time and then try turning on the TV once the voltage levels are on point.

7. Reset the TV Remote

You might not believe it at first. But resting your TV remote can sometimes help us to fix the issue where the Hisense TV won’t turn on.

So let’s drain the electricity on the TV remote control to reset it.

• Remove the batteries from the TV remote control.
• Press and hold the power button on the remote for about 30 seconds
• Put back the batteries
• Use your remote again

8. Confirm the Remote is Working

If you use the remote to turn on the Hisense TV, then there are changes that the remote might fail to work.

You have to ensure that the remote’s IR sensor is working fine.

• Turn on your smartphone camera.
• Point the remote’s IR sensor directly to the camera
• Now press any button on the remote and see if you can see the IR sensor blinking. If yes, then your TV remote is working. If not, you might want to replace the battery of the remote.

To replace the battery, slide the battery compartment cover and swap in a new pair of batteries. Try using the remote again and see if you can turn on the Hisense TV.

9. Disconnect Devices

As you might already know, your Hisense TV might go into standby mode (if enabled) when the TV receives no input. Even if the set-top box, DVD player, or any other device sends input, it won’t reach the TV if the cable is faulty.

One thing you can do here is to try disconnecting other devices connected to the TV and see if it turns on it. Additionally, you may force turn on the device to send the signal to the TV.

The fault might not be with the TV always. So double check other devices connected to your Hisense TV.

10. Check Warranty

If none of the fixes solved your issue, then your last resort is to get your Hisense TV repaired.

First, check if you have an active warranty for your TV. Almost all leading Hisense TVs have 1 year warranty. If your TV is still in the warranty period, then you can get your TV repaired or replaced, depending on the problem.

For in-warranty services, reach out to service@hisense-usa.com 

If your TV is a bit old and is out of warranty, you’ll have to take your Hisense TV to a service center for a paid repair.

11. Get in Touch With Hisense Support

Number: 1.888.935.8880

Monday – Friday: 09:00 AM – 09:00 PM EST

Saturday – Sunday, 09:00 AM – 06:00 PM EST

More contact options are available here.

Common Reasons Why Your Hisense TV Won’t Turn On

So far, we have tried every troubleshooting tip in our control. But if the issue is with some internal electrical components of the TV, then we have little to no control over those.

Here are some reasons why your Hisense TV won’t turn on.

• Broken Backlight: If your TV’s backlight is broken, then the TV won’t display anything. To check if the backlight on your TV is the culprit, you have to take a torch light and point it to the TV screen while the TV is turned on. If you see partial pictures appear on the screen, then it’s because the backlight is broken. You need to get it replaced.
• Issues with Motherboard: The motherboard of your TV is one of the essential electrical components that bind every other element together. If the motherboard or circuit fails, then the TV won’t turn on. Sudden voltage fluctuations, lightning, etc., could damage the motherboard.
• Faulty capacitors
• Bulged vents
• Broken electric circuit board
• Faulty IC

Wrap Up

More often than not, your Hisense TV that won’t turn on can be fixed in a couple of minutes from your house. But if the issue concerns the internal electrical parts, you are forced to take it to a Hisense service center or ask a technician to come home.

Let’s quickly run down what we did to fix Hisense TV that won’t turn on:

• Reset your Hisense TV
• Check the Connections
• Check the Wall Outlet
• Check the Input Source
• Reset the TV Remote
• Confirm the Remote is Working
• Check Warranty
• Get in Touch With Hisense Support
  

The post Hisense TV Won’t Turn On (Do this FIRST) – in 1 Min (2024) appeared first on IPEEWorld.

The good news is that there are multiple methods by which you can quickly fix the issue. I found myself in a situation where Vizio won’t turn on, and I managed to fix it in less than 2 minutes. Let’s see how.

Vizio TV Won’t Turn On

To fix an Vizio TV that won’t turn on, you must power cycle your TV first. Unplug your Vizio TV and wait for about a minute. Now press and hold the power button for 15 to 30 seconds. Once done, plug your Vizio TV back and try to turn it on using the power button.

Now let’s get more detailed into the steps and other methods to try when your Vizio TV doesn’t turn on.

Power cycling your Vizio TV should fix the issue in most cases.

Power Cycle Your Vizio TV

The first thing you want to do when your Vizio TV doesn’t turn on is to power cycle it. It is a simple process by which we drain 100% power left in the TV even after turning it off.

Once the power is completely discharged, we turn it on back again to see if the issue has been solved.

Follow the steps below to learn how to power cycle Vizio TV to fix the TV not turning on problem.

• Turn off and unplug your TV from the wall socket.
• Wait for about a minute before you do anything else
• Locate the power button on your TV and press and hold it for 15 to 30 seconds. (You have to press and hold the physical power button on your TV, not the one on your TV remote.)
• Now release the power button and plug it back.
• Turn the TV on the power button, which should solve the issue.

I managed to turn on my Vizio TV after a quick power cycle which took less than 2 minutes.

Reset the TV Remote

You might not believe it at first. But resting your TV remote can sometimes help us to fix the issue where the Vizio TV won’t turn on.

So let’s drain the electricity on the TV remote control to reset it.

• Remove the batteries from the TV remote control.
• Press and hold the power button on the remote for about 30 seconds
• Put back the batteries
• Use your remote again

Low Voltage

Vizio TVs have a minimum voltage level, below which the TV ceases to turn on. If the voltage level is too low, then that might be why your Vizio is not turning on. If frequent voltage fluctuations happen in your house, then chances are, the TV won’t turn on.

If this is the case, ensure you have balanced voltage levels before you try to turn on the TV. You might want to wait for some time and then try turning on the TV once the voltage levels are on point.

Double Check the Connections

One of the most basic and often missed points is that people forget to check the connection properly. It might not always be the fault of your Vizio TV.

Sometimes, the extension cord, power outlet, power cable, etc., might fail to work.

So it’s essential to check all the connections before trying other fixes.

1. Firstly, unplug the TV and wait for a couple of seconds. Connect it back and try to turn on the TV.
2. Check extension cord – If you use an extension cord to connect the TV to the wall socket, you might want to check if the extension cord is working correctly. Try connecting other devices like your mobile charger to the extension box and see if it charges your phone. Suppose it doesn’t then connect the TV directly to the wall socket or use another extension cord.
3. Unplug other appliances – If multiple devices or appliances are connected to the extension cord, you are advised to disconnect them and try turning on the TV. Sometimes, the high electricity-consuming appliances might cause issues with the TV.
4. Try a different wall socket – Sometimes, the wall socket might fail to work. Connecting your TV to another wall socket would be better to see if the Vizio TV turns on.
5. Try a different power source – If you have multiple power sources, try switching the power source.

Check the Wall Outlet

If you directly connect the TV to the wall outlet, you must ensure the outlet is working. If the wall outlet fails, obviously the TV won’t turn.

Try connecting a different device to the same wall outlet and see if it turns on. If it doesn’t, then the problem is with the wall outlet. In this case, you need to connect your TV to a different power outlet. Or if the device works, there’s no issue with the wall outlet.

Confirm the Remote is Working

If you use the remote to turn on Vizio TV, then there are changes that the remote might fail to work.

You have to ensure that the remote’s IR sensor is working fine.

• Turn on your smartphone camera.
• Point the remote’s IR sensor directly to the camera
• Now press any button on the remote and see if you can see the IR sensor blinking. If yes, then your TV remote is working. If not, you might want to replace the battery of the remote.

To replace the battery, slide the battery compartment cover and swap in a new pair of batteries. Try using the remote again and see if you can turn on the Vizio TV.

Unblock the Sensors on the TV

The TV and remote use IR sensors to communicate with each other. If the IR sensor on the TV is blocked, the IR signal won’t reach the TV.

• Check if any object is obstructing the IR sensor on your TV. It might be hard for us to figure out where exactly is the IR sensor on the TV. So, you have to make sure nothing is blocking in front of the TV screen and frame.
• Also, make sure not to block the IR sensor of your TV remote while using it. Move your hand or fingers from the IR sensor before using it.

Before you use your remote again, make sure nothing is blocking the TV sensor.

Check the Input Source

All modern Vizio TVs comes with multiple input sources, including multiple HDMI, Display port, and more. You have to make sure that you selected the correct input source.

Say, for example, if you connected to HDMI port one and selected HDMI port two as the source, the TV might not display anything.

You must change the input source to the correct port in this case.

Let’s see how to check and change the input source in an Vizio TV.

How To Change Input Source Using TV Remote

1. Press the power button on the TV or remote control to turn on the TV
2. Click on the Menu or Input button to see if a menu pops up on the screen. If yes, continue following the steps given below. Otherwise, jump to the next section.
3. Click on the option which says ‘Source.’
4. Select the proper Source and see if it works

How To Change Input Source Without TV Remote

1. Turn on the TV using the power button.
2. Use the physical buttons on the TV to open the Menu and navigate.
3. Find the Source menu and select the proper input source

Factory Reset Vizio TV

By following the steps above, if you somehow managed to turn on the TV next, it would be ideal for resetting the TV into factory settings.

For starters, resetting a TV will change all the settings to factory defaults.

Use your TV remote and head over to Settings.

Find the ‘Reset to Factory Defaults’ option under the Device & Software section and click on it. (Depending on the TV model/manufacturing year/firmware version, the settings might differ slightly. But you have to find the Factory Reset option)

Wait for a couple of minutes till the resetting process is one. Once done, your Vizio TV will turn on, and you’ll have to go through the entire setup process.

Check Warranty

If none of the fixes solved your issue, then your last resort is to get your Vizio TV repaired.

First, check if you have an active warranty for your TV. Almost all leading Vizio TVs have at least a 2 – 3 years warranty. If your TV is still in the warranty period, then you can get your TV repaired or replaced, depending on the problem.

If your TV is a bit old and is out of warranty, you’ll have to take your Vizio TV to a service center for a paid repair.

Get in Touch With Vizio Support

U.S. and Canada: 844-254-8087

Mexico: 844-324-5953

Monday – Friday, 8:00 AM – 11:00 PM CST

Saturday – Sunday, 9:00 AM – 8:00 PM CST

You may also get in touch with the Vizio support team via live chat as well.

Reasons Why Your Vizio TV Won’t Turn On

So far, we have tried every troubleshooting tip in our control. But if the issue is with some internal electrical components of the TV, then we have little to no control over those.

Here are some reasons why your Vizio TV won’t turn on.

• Broken Backlight: If your TV’s backlight is broken, then the TV won’t display anything. To check if the backlight on your TV is the culprit, you have to take a torch light and point it to the TV screen while the TV is turned on. If you see partial pictures appear on the screen, then it’s because the backlight is broken. You need to get it replaced.
• Issues with Motherboard: The motherboard of your TV is one of the essential electrical components that bind every other element together. If the motherboard or circuit fails, then the TV won’t turn on. Sudden voltage fluctuations, lightning, etc., could damage the motherboard.
• Faulty capacitors
• Bulged vents
• Broken electric circuit board
• Faulty IC

Frequently Asked Questions

Why is my Vizio TV not turning on?

Your Vizio TV won’t turn in some cases like faulty capacitors, motherboard or IC, improper cable connection, power fluctuation, and damaged power socket.

Why won’t my TV turn on, but red light is on Vizio?

It might be because the IR sensor of the remote or TV is blocked or the remote’s battery is down. Try to use the power button on the TV to turn it on.

Wrap Up

More often than not, your Vizio TV that won’t turn on can be fixed in a couple of minutes from your house. But if the issue concerns the internal electrical parts, you are forced to take it to an Vizio service center or ask a technician to come home.

Let’s quickly recap what we did to fix our Vizio TV that won’t turn on:

• Unplug the TV and wait for 60 seconds. Press and hold the power button for 15 to 30 seconds and try to turn on the TV
• Check all the connections, including the power cord, wall socket, extension cord, etc
• Reset the TV remote by removing the battery and holding the power button for 30 seconds
• Make sure the IR sensor on the TV and remote control is not being blocked
• Select the proper input source
• Send the TV for repair

I hope you found this guide helpful in fixing your Vizio TV that doesn’t turn on.

The post Vizio TV Won’t Turn On (Try THIS First!) – 10 Fixes appeared first on IPEEWorld.

The good news is that there are multiple methods by which you can quickly fix the issue. I found myself in a situation where Insignia won’t turn on, and I managed to fix it in less than 2 minutes. Let’s see how.

Insignia TV Won’t Turn On

To fix an Insignia TV that won’t turn on, you must power cycle your TV first. Unplug your Insignia TV and wait for about a minute. Now press and hold the power button for 15 to 30 seconds. Once done, plug your Insignia TV back and try to turn it on using the power button.

Now let’s get more detailed into the steps and other methods to try when your Insignia TV doesn’t turn on.

Power cycling your Insignia TV should fix the issue in most cases.

Power Cycle Your Insignia TV

The first thing you want to do when your Insignia TV doesn’t turn on is to power cycle it. It is a simple process by which we drain 100% power left in the TV even after turning it off.

Once the power is completely discharged, we turn it on back again to see if the issue has been solved.

Follow the steps below to learn how to power cycle Insignia TV to fix the TV not turning on problem.

• Turn off and unplug your TV from the wall socket.
• Wait for about a minute before you do anything else
• Locate the power button on your TV and press and hold it for 15 to 30 seconds. (You have to press and hold the physical power button on your TV, not the one on your TV remote.)
• Now release the power button and plug it back.
• Turn the TV on the power button, which should solve the issue.

I managed to turn on my Insignia TV after a quick power cycle which took less than 2 minutes.

Reset the TV Remote

You might not believe it at first. But resting your TV remote can sometimes help us to fix the issue where the Insignia TV won’t turn on.

So let’s drain the electricity on the TV remote control to reset it.

• Remove the batteries from the TV remote control.
• Press and hold the power button on the remote for about 30 seconds
• Put back the batteries
• Use your remote again

Low Voltage

Insignia TVs have a minimum voltage level, below which the TV ceases to turn on. If the voltage level is too low, then that might be why your Insignia is not turning on. If frequent voltage fluctuations happen in your house, then chances are, the TV won’t turn on.

If this is the case, ensure you have balanced voltage levels before you try to turn on the TV. You might want to wait for some time and then try turning on the TV once the voltage levels are on point.

Double Check the Connections

One of the most basic and often missed points is that people forget to check the connection properly. It might not always be the fault of your Insignia TV.

Sometimes, the extension cord, power outlet, power cable, etc., might fail to work.

So it’s essential to check all the connections before trying other fixes.

1. Firstly, unplug the TV and wait for a couple of seconds. Connect it back and try to turn on the TV.
2. Check extension cord – If you use an extension cord to connect the TV to the wall socket, you might want to check if the extension cord is working correctly. Try connecting other devices like your mobile charger to the extension box and see if it charges your phone. Suppose it doesn’t then connect the TV directly to the wall socket or use another extension cord.
3. Unplug other appliances – If multiple devices or appliances are connected to the extension cord, you are advised to disconnect them and try turning on the TV. Sometimes, the high electricity-consuming appliances might cause issues with the TV.
4. Try a different wall socket – Sometimes, the wall socket might fail to work. Connecting your TV to another wall socket would be better to see if the Insignia TV turns on.
5. Try a different power source – If you have multiple power sources, try switching the power source.

Check the Wall Outlet

If you directly connect the TV to the wall outlet, you must ensure the outlet is working. If the wall outlet fails, obviously the TV won’t turn.

Try connecting a different device to the same wall outlet and see if it turns on. If it doesn’t, then the problem is with the wall outlet. In this case, you need to connect your TV to a different power outlet. Or if the device works, there’s no issue with the wall outlet.

Confirm the Remote is Working

If you use the remote to turn on Insignia TV, then there are changes that the remote might fail to work.

You have to ensure that the remote’s IR sensor is working fine.

• Turn on your smartphone camera.
• Point the remote’s IR sensor directly to the camera
• Now press any button on the remote and see if you can see the IR sensor blinking. If yes, then your TV remote is working. If not, you might want to replace the battery of the remote.

To replace the battery, slide the battery compartment cover and swap in a new pair of batteries. Try using the remote again and see if you can turn on the Insignia TV.

Unblock the Sensors on the TV

The TV and remote use IR sensors to communicate with each other. If the IR sensor on the TV is blocked, the IR signal won’t reach the TV.

• Check if any object is obstructing the IR sensor on your TV. It might be hard for us to figure out where exactly is the IR sensor on the TV. So, you have to make sure nothing is blocking in front of the TV screen and frame.
• Also, make sure not to block the IR sensor of your TV remote while using it. Move your hand or fingers from the IR sensor before using it.

Before you use your remote again, make sure nothing is blocking the TV sensor.

Check the Input Source

All modern Insignia TVs comes with multiple input sources, including multiple HDMI, Display port, and more. You have to make sure that you selected the correct input source.

Say, for example, if you connected to HDMI port one and selected HDMI port two as the source, the TV might not display anything.

You must change the input source to the correct port in this case.

Let’s see how to check and change the input source in an Insignia TV.

How To Change Input Source Using TV Remote

1. Press the power button on the TV or remote control to turn on the TV
2. Click on the Menu or Input button to see if a menu pops up on the screen. If yes, continue following the steps given below. Otherwise, jump to the next section.
3. Click on the option which says ‘Source.’
4. Select the proper Source and see if it works

How To Change Input Source Without TV Remote

1. Turn on the TV using the power button.
2. Use the physical buttons on the TV to open the Menu and navigate.
3. Find the Source menu and select the proper input source

Factory Reset Insignia TV

By following the steps above, if you somehow managed to turn on the TV next, it would be ideal for resetting the TV into factory settings.

For starters, resetting a TV will change all the settings to factory defaults.

Use your TV remote and head over to Settings.

Find the ‘Reset to Factory Defaults’ option under the Device & Software section and click on it. (Depending on the TV model/manufacturing year/firmware version, the settings might differ slightly. But you have to find the Factory Reset option)

Wait for a couple of minutes till the resetting process is one. Once done, your Insignia TV will turn on, and you’ll have to go through the entire setup process.

Check Warranty

If none of the fixes solved your issue, then your last resort is to get your Insignia TV repaired.

First, check if you have an active warranty for your TV. Almost all leading Insignia TVs have at least a 2 – 3 years warranty. If your TV is still in the warranty period, then you can get your TV repaired or replaced, depending on the problem.

If your TV is a bit old and is out of warranty, you’ll have to take your Insignia TV to a service center for a paid repair.

Get in Touch With Insignia Support

U.S. and Canada: 1-877-467-4289

Mexico: 01-800-926-3000

Daily 8 a.m. to 9 p.m. CT

Reasons Why Your Insignia TV Won’t Turn On

So far, we have tried every troubleshooting tip in our control. But if the issue is with some internal electrical components of the TV, then we have little to no control over those.

Here are some reasons why your Insignia TV won’t turn on.

• Broken Backlight: If your TV’s backlight is broken, then the TV won’t display anything. To check if the backlight on your TV is the culprit, you have to take a torch light and point it to the TV screen while the TV is turned on. If you see partial pictures appear on the screen, then it’s because the backlight is broken. You need to get it replaced.
• Issues with Motherboard: The motherboard of your TV is one of the essential electrical components that bind every other element together. If the motherboard or circuit fails, then the TV won’t turn on. Sudden voltage fluctuations, lightning, etc., could damage the motherboard.
• Faulty capacitors
• Bulged vents
• Broken electric circuit board
• Faulty IC

Frequently Asked Questions

Why is my Insignia TV not turning on?

Your Insignia TV won’t turn in some cases like faulty capacitors, motherboard or IC, improper cable connection, power fluctuation, and damaged power socket.

Why won’t my TV turn on, but red light is on Insignia?

It might be because the IR sensor of the remote or TV is blocked or the remote’s battery is down. Try to use the power button on the TV to turn it on.

Wrap Up

More often than not, your Insignia TV that won’t turn on can be fixed in a couple of minutes from your house. But if the issue concerns the internal electrical parts, you are forced to take it to an Insignia service center or ask a technician to come home.

Let’s quickly recap what we did to fix our Insignia TV that won’t turn on:

• Unplug the TV and wait for 60 seconds. Press and hold the power button for 15 to 30 seconds and try to turn on the TV
• Check all the connections, including the power cord, wall socket, extension cord, etc
• Reset the TV remote by removing the battery and holding the power button for 30 seconds
• Make sure the IR sensor on the TV and remote control is not being blocked
• Select the proper input source
• Send the TV for repair

I hope you found this guide helpful in fixing your Insignia TV that doesn’t turn on.

The post Insignia TV Won’t Turn On (Try THIS First!) 2024 appeared first on IPEEWorld.

The good news is that there are multiple methods by which you can quickly fix the issue. I found myself in a situation where LG won’t turn on, and I managed to fix it in less than 2 minutes. Let’s see how.

LG TV Won’t Turn On

To fix an LG TV that won’t turn on, you must power cycle your TV first. Unplug your LG TV and wait for about a minute. Now press and hold the power button for 15 to 30 seconds. Once done, plug your LG TV back and try to turn it on using the power button.

Now let’s get more detailed into the steps and other methods to try when your LG TV doesn’t turn on.

Power cycling your LG TV should fix the issue in most cases.

Power Cycle Your LG TV

The first thing you want to do when your LG TV doesn’t turn on is to power cycle it. It is a simple process by which we drain 100% power left in the TV even after turning it off.

Once the power is completely discharged, we turn it on back again to see if the issue has been solved.

Follow the steps below to learn how to power cycle LG TV to fix the TV not turning on problem.

• Turn off and unplug your TV from the wall socket.
• Wait for about a minute before you do anything else
• Locate the power button on your TV and press and hold it for 15 to 30 seconds. (You have to press and hold the physical power button on your TV, not the one on your TV remote.)
• Now release the power button and plug it back.
• Turn the TV on the power button, which should solve the issue.

I managed to turn on my LG TV after a quick power cycle which took less than 2 minutes.

Reset the TV Remote

You might not believe it at first. But resting your TV remote can sometimes help us to fix the issue where the LG TV won’t turn on.

So let’s drain the electricity on the TV remote control to reset it.

• Remove the batteries from the TV remote control.
• Press and hold the power button on the remote for about 30 seconds
• Put back the batteries
• Use your remote again

Low Voltage

LG TVs have a minimum voltage level, below which the TV ceases to turn on. If the voltage level is too low, then that might be why your LG is not turning on. If frequent voltage fluctuations happen in your house, then chances are, the TV won’t turn on.

If this is the case, ensure you have balanced voltage levels before you try to turn on the TV. You might want to wait for some time and then try turning on the TV once the voltage levels are on point.

Double Check the Connections

One of the most basic and often missed points is that people forget to check the connection properly. It might not always be the fault of your LG TV.

Sometimes, the extension cord, power outlet, power cable, etc., might fail to work.

So it’s essential to check all the connections before trying other fixes.

1. Firstly, unplug the TV and wait for a couple of seconds. Connect it back and try to turn on the TV.
2. Check extension cord – If you use an extension cord to connect the TV to the wall socket, you might want to check if the extension cord is working correctly. Try connecting other devices like your mobile charger to the extension box and see if it charges your phone. Suppose it doesn’t then connect the TV directly to the wall socket or use another extension cord.
3. Unplug other appliances – If multiple devices or appliances are connected to the extension cord, you are advised to disconnect them and try turning on the TV. Sometimes, the high electricity-consuming appliances might cause issues with the TV.
4. Try a different wall socket – Sometimes, the wall socket might fail to work. Connecting your TV to another wall socket would be better to see if the LG TV turns on.
5. Try a different power source – If you have multiple power sources, try switching the power source.

Check the Wall Outlet

If you directly connect the TV to the wall outlet, you must ensure the outlet is working. If the wall outlet fails, obviously the TV won’t turn.

Try connecting a different device to the same wall outlet and see if it turns on. If it doesn’t, then the problem is with the wall outlet. In this case, you need to connect your TV to a different power outlet. Or if the device works, there’s no issue with the wall outlet.

Confirm the Remote is Working

If you use the remote to turn on LG TV, then there are changes that the remote might fail to work.

You have to ensure that the remote’s IR sensor is working fine.

• Turn on your smartphone camera.
• Point the remote’s IR sensor directly to the camera
• Now press any button on the remote and see if you can see the IR sensor blinking. If yes, then your TV remote is working. If not, you might want to replace the battery of the remote.

To replace the battery, slide the battery compartment cover and swap in a new pair of batteries. Try using the remote again and see if you can turn on the LG TV.

Unblock the Sensors on the TV

The TV and remote use IR sensors to communicate with each other. If the IR sensor on the TV is blocked, the IR signal won’t reach the TV.

• Check if any object is obstructing the IR sensor on your TV. It might be hard for us to figure out where exactly is the IR sensor on the TV. So, you have to make sure nothing is blocking in front of the TV screen and frame.
• Also, make sure not to block the IR sensor of your TV remote while using it. Move your hand or fingers from the IR sensor before using it.

Before you use your remote again, make sure nothing is blocking the TV sensor.

Check the Input Source

All modern LG TVs comes with multiple input sources, including multiple HDMI, Display port, and more. You have to make sure that you selected the correct input source.

Say, for example, if you connected to HDMI port one and selected HDMI port two as the source, the TV might not display anything.

You must change the input source to the correct port in this case.

Let’s see how to check and change the input source in an LG TV.

How To Change Input Source Using TV Remote

1. Press the power button on the TV or remote control to turn on the TV
2. Click on the Menu or Input button to see if a menu pops up on the screen. If yes, continue following the steps given below. Otherwise, jump to the next section.
3. Click on the option which says ‘Source.’
4. Select the proper Source and see if it works

How To Change Input Source Without TV Remote

1. Turn on the TV using the power button.
2. Use the physical buttons on the TV to open the Menu and navigate.
3. Find the Source menu and select the proper input source

You can also use the LG ThinQ app if you don’t have the remote.

Check Warranty

If none of the fixes solved your issue, then your last resort is to get your LG TV repaired.

First, check if you have an active warranty for your TV. Almost all leading LG TVs come with at least a 2 – 3 years warranty. If your TV is still in the warranty period, then you can get your TV repaired or replaced, depending on the problem.

If your TV is a bit old and is out of warranty, then you’ll have to take your LG TV to a service center for a paid repair.

Reasons Why Your LG TV Won’t Turn On

So far, we have tried every troubleshooting tip in our control. But if the issue is with some internal electrical components of the TV, then we have little to no control over those.

Here are some reasons why your LG TV won’t turn on.

• Broken Backlight: If your TV’s backlight is broken, then the TV won’t display anything. To check if the backlight on your TV is the culprit, you have to take a torch light and point it to the TV screen while the TV is turned on. If you see partial pictures appear on the screen, then it’s because the backlight is broken. You need to get it replaced.
• Issues with Motherboard: The motherboard of your TV is one of the essential electrical components that bind every other element together. If the motherboard or circuit fails, then the TV won’t turn on. Sudden voltage fluctuations, lightning, etc., could damage the motherboard.
• Faulty capacitors
• Bulged vents
• Broken electric circuit board
• Faulty IC

Frequently Asked Questions

Why is my LG TV not turning on?

Your LG TV won’t turn in some cases like faulty capacitors, motherboard or IC, improper cable connection, power fluctuation, and damaged power socket.

Why won’t my TV turn on, but red light is on LG?

It might be because the IR sensor of the remote or TV is blocked or the remote’s battery is down. Try to use the power button on the TV to turn it on.

Wrap Up

More often than not, your LG TV that won’t turn on can be fixed in a couple of minutes from your house. But if the issue concerns the internal electrical parts, you are forced to take it to an LG service center or ask a technician to come home.

Let’s quickly recap what we did to fix our LG TV that won’t turn on:

• Unplug the TV and wait for 60 seconds. Press and hold the power button for 15 to 30 seconds and try to turn on the TV
• Check all the connections, including the power cord, wall socket, extension cord, etc
• Reset the TV remote by removing the battery and holding the power button for 30 seconds
• Make sure the IR sensor on the TV and remote control is not being blocked
• Select the proper input source
• Send the TV for repair

I hope you found this guide helpful in fixing your LG TV that doesn’t turn on.

The post LG TV Won’t Turn On (I FIXED Mine In 2 Minutes) appeared first on IPEEWorld.