If you’ve noticed your PS5’s DualSense controller responding slower than it should be, with button presses and joystick movements registering late in-game, you’re likely dealing with input lag or delay.

This guide will go over some of the common causes of DualSense controller input lag and delay, as well as different solutions you can try to fix the issue.

What Causes PS5 Controller Input Lag?

There are a few potential culprits behind sluggish or delayed response times on your PS5’s DualSense controller:

• Distance from Console – The farther you sit from your PS5 console, the weaker the wireless signal. Sitting 8-10 feet or more away can introduce lag.
• Low battery – If the controller’s battery is too low, a lag issue may pop up.
• Defective Hardware – In some cases, the controller or console may have a hardware defect, causing delayed response times. Issues like faulty wireless antennas or connection points may be the issue.
• Incorrect Settings – Wrong or suboptimal controller settings like vibration, trigger effect intensity, or sensitivity can negatively impact response.
• Interference – Other wireless devices and electronics can create interference with your controller’s wireless signal. Nearby routers, cell phones, Bluetooth devices, and other wireless controllers can disrupt signal timing.
• Outdated Software – An outdated PS5 system software/firmware can make the wireless connection inefficient and laggy. Apps/games may also need patches.
• Server Issues – For online games, server-side issues can also produce input lag if they are slow to relay your actions. This is out of your control.

How To Fix PS5 Controller Input Lag?

Restart the controller and the console

One simple but effective first step is to restart both your PS5 controller and console.

Restarting clears out any temporary software bugs or wireless connection issues that may be interfering with the sync and causing lag.

To restart the DualSense controller, press and hold the PlayStation button located in the middle of the controller for at least 10 to 15 seconds until the light bar at the top turns off. This will force the controller to power down.

Once the controller light is off, press the PlayStation button again to turn the controller back on and resync it with the console.

For the PS5 console, go to the control center and select “Power” then “Restart PS5” to fully reboot the system.

Allow both the controller and console to go through their restart and reboot processes. This will clear any software issues and re-establish the wireless connection, often eliminating minor lag or sync issues in the process.

Restarting the console can help fix mic and sound-related problems as well.

Reset the controller

Resetting the DualSense controller erases all synced data and restores it to default settings. This can eliminate any corrupted data or settings that may be causing lag.

To reset the controller:

1. Turn the PS5 off completely.
2. Locate the small reset button on the back of the controller near the L2 trigger.
3. Using a paperclip or small pin, press and hold the reset button for 3-5 seconds until you feel the controller vibrate.
4. Turn the PS5 back on and press the PlayStation button on the controller to resync.

Resetting removes any paired user profiles, erases settings like button assignments, sensitivity, and vibration intensity, and restores them to out-of-box defaults.

After resetting, you’ll need to re-pair the controller and adjust your settings again. This often resolves persistent lag issues caused by erroneous control settings. It essentially gives you a fresh start with the controller’s wireless connection and operation.

Update Your PS5 Controller Software

Like any device, the DualSense controller relies on software and firmware to function properly. Over time, bugs or inefficiencies in the controller’s firmware can develop that hinder response times and cause lag.

Sony periodically releases software updates for the DualSense to fix bugs and improve performance. Keeping your controller updated ensures you have the latest firmware optimizations.

To update your controller software:

1. On your PS5 dashboard, go to Settings > Accessories.
2. Select Controllers > Wireless Controller Device Software.
3. Choose Update to download and install the newest controller firmware.
4. Once updated, reconnect your controller via USB or wireless.

Make sure to fully power cycle both the console and controller after an update to clear caches. Updates can resolve wireless connectivity issues, improve button and joystick responsiveness, and reduce input delays.

Switch Your TV to Game Mode

Many modern TVs have specialized gaming picture modes that can significantly reduce input lag between the PS5 and your display.

The various picture presets like Movie, Vivid, Sports, etc. process the video signal differently before displaying it on screen. This extra image processing introduces input delay.

Game mode turns off all unnecessary video processing, giving you the fastest signal response time possible. The tradeoff is some loss in image quality, but for responsive gaming, this is an excellent option.

To reduce lag:

1. On your TV remote, find the Picture Mode settings. This may be under Picture, Video, or Game menus.
2. Select the preset labeled Game, Gaming, or Game Optimizer. Different brands use varying names.
3. While enabled, you should notice snappier response times when playing PS5 games. Disable when watching movies for best visuals.

Try a Wired USB Connection

The DualSense controller is designed primarily for wireless operation. However, you can connect it directly to your PS5 via USB cable to rule out wireless interference as the cause of lag.

To switch to wired mode:

• Plug any USB-C cable into the USB-C port on top of the DualSense controller.
• Connect the other end into any open USB port on your PS5 console.
• Press the PlayStation button on the controller to sync it.

This will switch the controller into wired operation mode. The inputs will now be sent directly over the USB cable, bypassing the wireless connection.

Test the controller in a game while in wired mode. If the lag is dramatically reduced or eliminated, it points to some sort of wireless interference impacting the controller. You can then troubleshoot the play environment and wireless settings further.

Switch PS5 to Performance Mode

The PS5 offers a choice between two system modes – Performance or Resolution. The performance mode lowers visual fidelity slightly in exchange for higher frame rates. This can noticeably reduce input lag and improve controller response.

Here’s how to enable it:

1. From the PS5 dashboard, go to Settings > Saved Data and Game/App Settings.
2. Select Game Presets.
3. Choose Performance Mode.
4. Confirm changing the preset.

This will set the system default to favor performance over visuals in supported games. The higher frame rates delivered in this mode greatly reduce the delay between your controller inputs and actions happening on-screen.

Try testing your controller response in games before and after switching to performance mode. The faster response times will make a difference in competitive multiplayer games where split-second reactions matter.

Disable A/V Sync & V-Sync

Two features that can add delay to games are A/V sync and V-sync. Disabling them can lower input lag:

• A/V Sync synchronizes audio and video output, delaying visuals slightly. Turn this Off in Sound settings.
• V-Sync synchronizes frame output with your TV’s refresh rate. Disable this in your game’s Video/Graphics settings if available.

Disabling both will reduce the extraser processing that introduces display lag. The downsides are possible screen tearing and audio delay without sync.

But for competitive gaming where input response times are crucial, it’s worth disabling these. The visual tears and audio mismatches will be less noticeable than severe controller lag.

Update PS5 software

Sony releases regular software updates for the PS5 to improve performance, fix bugs, and optimize the system. Keeping your console updated can resolve problems causing controller lag.

Here’s how to update your PS5:

1. From the home screen, go to Settings.
2. Select System > System Software > System Software Update and Settings.
3. Choose Update System Software.
4. If an update is available, select Download and Install.
5. Follow the on-screen prompts to complete the update process.

Important: After updating, you must power cycle the PS5 completely by turning it off and back on. This clears any cached data and ensures the new software boots up fresh.

The post Fix PS5 DualSense Controller Lag in 3 Easy Steps – Get Instant Response Time appeared first on IPEEWorld.

It can be frustrating when you’re trying to communicate with your friends during gameplay, but your mic won’t cooperate.

Fortunately, there are some simple steps you can take to fix the problem and get back to enjoying your gaming experience.

First, check your audio settings to ensure your mic is connected correctly and selected as the input device.

You can do this by going to Settings > Sound > Microphone. Here, you can adjust the input volume and select the appropriate device. If your mic still isn’t working, try changing the microphone level and speaking into the mic to see if it responds.

If you’re still having trouble with your PS5 mic, don’t worry – there are other solutions to try.

Unmute The Mic

If your PS5 mic is not working, it could be because you have accidentally muted it.

Simply press the Mute button on your DualSense controller to unmute the mic.

The mute button is located on the bottom left-hand side of the controller, just below the PlayStation button.

Once you have pressed the mute button, you should see a small microphone icon appear on your screen. This indicates that your mic is now unmuted, and you should be able to speak to your teammates or friends in-game.

Set The Right Mic As Default One

If your PS5 mic is not working, the problem could be that the wrong microphone is set as the default one. Here’s how to set the right mic as the default one:

Press the PS button on your DualSense controller to go to the Quick Menu.

Select the Mic icon.

Click Mic.

Select the right mic to use, and you should be good to go.

Ensure that the microphone you want to use is selected as the default. If you’re unsure which microphone to choose, try each one until you find the one that works.

Adjust The Microphone Level

If your PS5 mic is not working, adjusting the microphone level might help. Here’s how you can do it:

1. Press the PS button on your DualSense controller to go to the Quick Menu.
2. Select Mic icon.
3. Select “Adjust Mic Level”
4. Now try speaking something and ensure the level reaches “Good”.
5. You can use the slider below to adjust the level (if needed).

You can also adjust the microphone level directly from your DualSense controller. Press the PlayStation button to access the control center, then select Mic. From there, you can change input devices, mute and unmute your mic, and adjust your mic level.

Check Your Mic Settings

If your PS5 mic is not working, it could be due to incorrect mic settings. Here are a few things you can do to check your mic settings:

• First, ensure that your mic is properly connected to your PS5 controller. If it is not, disconnect and reconnect it to the controller.
• Next, go to the PS5 home screen and select Settings > Sound > Microphone. Here, you can adjust the microphone volume and enable or disable the microphone.
• If your mic is still not working, check if it is muted. To do this, press the small flat button beneath the PS button of the controller. If the button is red, it means the mic is muted. Press it again to unmute the mic.
• Another thing to check is the input device. Go to Settings > Sound > Input Device and select Microphone on Controller. This should ensure that your mic is set as the input device.
• If you are using a gaming headset with a mic, make sure that the headset is properly connected to the PS5 console and that the mic is not muted.

By checking your mic settings, you can fix many common PS5 mic issues. If your mic still doesn’t work, try some of the other solutions we’ll discuss in the following sections.

Ensure The Headphones & Mic Is Working

If your PS5 mic is not working, you should ensure that your headphones and mic are working. Here are some steps you can follow to ensure that your headphones and mic are functioning properly

Ensure your headphones and mic are correctly connected to your PS5 controller. If you’re using a wired headset, check that the cable is securely connected to the controller. If you’re using a wireless headset, ensure it’s properly paired with your PS5.

To test your mic, go to Settings > Sound > Microphone and select Test Microphone. Speak into the mic and see if the sound levels are moving. If the sound is not registering, try adjusting the mic volume or checking if the mic is muted.

Try A Different Mic

Sometimes, the issue may not be with the console but the mic itself.

Before you go out and purchase a new mic, try borrowing one from a friend or family member to see if it works with your PS5. This can help you determine if the issue is with your console or your mic.

If you don’t have anyone to borrow a mic from, you can also try using a different headset or earbuds with a built-in mic. Make sure to check the compatibility of the headset or earbuds with the PS5 before purchasing.

Restart PS5

If you are experiencing issues with your PS5 microphone, restarting your console may be a quick and easy solution. This can help clear any temporary glitches or bugs that might be causing the issue.

To restart your PS5, follow these simple steps:

1. Press and hold the power button on the front of your console until it beeps twice.
2. Wait for the console to shut down completely.
3. Once the console is off, wait a few seconds, and then press the power button again to turn it back on.

After your console has restarted, try using your microphone again to see if the issue has been resolved. If the problem persists, you may need to try some other troubleshooting steps.

It’s important to note that restarting your PS5 may cause you to lose any unsaved progress in your games or applications, so be sure to save your work before restarting if necessary.

Update PS5

If your PS5 mic is not working, the first thing you should do is check for system updates. Outdated software can cause issues with your PS5’s microphone, so it’s important to make sure your system is up to date.

To check for system updates, follow these steps:

Go to the PS5 home screen.

Select the gear icon in the top right corner to access the Settings menu.

Scroll down to System and select it.

Select System Software.

Select System Software Update and Settings.

Select Update System Software.

If there is an update available, you will see an option to Download and Install.

Select Update using Internet.

Just select Update.

It’s important to note that system updates can take some time to download and install. Make sure your PS5 is plugged in and connected to the internet before starting the update process.

Once the update is complete, restart your PS5 and check if your mic is now working. If not, there may be other issues with your hardware or software that need to be addressed.

Checking for system updates is a simple and effective way to fix issues with your PS5 mic. Make sure to keep your system up to date to avoid future problems.

Contact Sony Support

If you’ve tried the previous troubleshooting steps and your PS5 mic still isn’t working, it’s time to contact Sony Support. They have a team of experts who can help you diagnose and fix the issue.

To contact Sony Support, you can visit their website and choose the appropriate category for your issue. If you’re having trouble with your PS5, select “PlayStation” and then “PS5.” You can then choose to either chat with a support representative or schedule a call.

Visit Sony Support

Before contacting Sony Support, make sure you have the following information handy:

• Your PS5’s serial number
• A description of the issue you’re experiencing
• Any error messages you’ve received
• Any troubleshooting steps you’ve already tried

Having this information ready will help the support representative quickly diagnose and fix your issue.

If the support representative is unable to fix the issue, they may recommend sending your PS5 in for repairs. If your PS5 is still under warranty, the repairs will be covered. If it’s not under warranty, you’ll need to pay for the repairs.

What’s Next?

In this article, we have discussed some common reasons why your PS5 mic may not be working and provided some simple solutions to fix the issue. Remember to check your mic settings, update your controller, and test your mic on other devices to ensure it’s not a hardware issue.

If you’re still experiencing issues, try resetting your console or contacting customer support for further assistance. It’s important to keep in mind that some games may have their own mic settings, so be sure to check those as well.

Overall, fixing your PS5 mic not working issue can be a simple process with a few troubleshooting steps. By following the tips provided in this article, you should be able to get back to gaming and communicating with your friends in no time.

The post PS5 Mic Not Working – Fixed (Just Do This) – 2024 appeared first on IPEEWorld.

When I bought a PS5 last month, it came with one DualSense wireless controller only. Yes, you heard it right. If you want to play multiplayer games with your friends, you need to buy extra controllers. A PlayStation DualSense Wireless Controller costs $69.

Sony recently started offering console with two controller bundles.

This innovative controller offers a highly immersive gaming experience with haptic feedback, dynamic adaptive triggers, and a built-in microphone. It’s the perfect accessory to help you get the most out of your PS5 gaming experience.

If you’re looking to play games with friends or family, the good news is that the PS5 supports up to four controllers at once.

You can purchase additional DualSense wireless controllers separately to enjoy multiplayer games and other features that require multiple controllers.

Why Did Sony Only Include One Controller In The Box?

Including a second controller would result in significant expenses

Including an additional controller in the box with the PlayStation 5 (PS5) would have likely increased the overall cost of the console package.

A PlayStation with a single DualSense controller costs $499. Adding more PS5 controllers will increase the overall price tag of PS5 by $70.

The PS5 is a high-end gaming system with advanced hardware and features, and adding a second controller would have added to the production and distribution expenses.

To keep the initial purchase price more affordable for consumers, Sony opted to provide just one controller in the package.

Many gamers find a second controller unnecessary

Sony likely considered that many gamers might not immediately require a second controller when they purchase a new PS5.

The primary demographic for the PS5 consists of individual gamers or casual players who may not need an extra controller right away.

The one controller included in the package would be sufficient for solo gaming sessions and initial gameplay experiences.

More Profit By Selling PS5 Controllers Separately

By offering only one controller with the PS5, Sony might have aimed to encourage consumers to buy additional controllers separately.

This approach serves two purposes:

Firstly, it allows gamers to choose whether they need an extra controller based on their specific gaming habits or preferences, avoiding unnecessary costs for those who may not require it.

Secondly, it creates an opportunity for Sony to sell high-margin accessories like the DualSense controller separately, generating additional revenue for the company.

Can you use PS4 controller with PS5?

Yes, you can use a PS4 controller with a PS5. Sony has designed the PS5 to be backward compatible with most PS4 games and accessories, including the DualShock 4 controller used with the PS4.

If you already have a PS4 controller and you want to play multiplayer PS4 games on your PS5, you may use them.

When playing PS4 games on the PS5, you can use the DualShock 4 as an alternative to the newer DualSense controller.

However, there are a few important points to note.

While the PS4 controller is compatible with PS4 games played on the PS5, it is not officially supported for playing PS5 games.

Most PS5 games are designed to take advantage of the unique features of the DualSense controller, which includes advanced haptic feedback and adaptive triggers. As a result, the PS5 games might not fully function or utilize these features when played with a PS4 controller.

If you have a PlayStation VR (PSVR) headset, you can use the PS4 controller to play VR games on the PS5. The PS5 requires a special adapter (included with the PS5 console) to connect the PSVR headset.

PS5 Controller Features

The PS5 DualSense controller comes with several innovative features that enhance the gaming experience and offer a higher level of immersion. Here are the key features of the PS5 DualSense controller:

1. Haptic Feedback: The DualSense controller is equipped with advanced haptic feedback technology, which replaces the traditional rumble found in previous controllers. It offers more nuanced vibrations, allowing players to feel a broader range of sensations, such as the texture of different surfaces, environmental effects like rain or explosions, and more.
2. Adaptive Triggers: The L2 and R2 triggers on the DualSense controller are adaptive, meaning they can offer varying levels of resistance depending on in-game actions. Developers can customize the triggers to simulate the tension of actions like drawing a bowstring or pressing the brakes in a racing game, providing a more realistic and immersive feel.
3. Built-in Microphone and Speaker: The DualSense controller includes a built-in microphone, allowing players to communicate with others without the need for a headset. Additionally, it features a speaker, which can provide in-game audio or additional immersion through localized sound effects.
4. Create Button: Replacing the Share button on the PS4 controller, the Create button on the DualSense controller allows players to capture screenshots, record video clips, and share content with ease. It also opens up new creative possibilities for players to craft and customize their gaming experiences.
5. Built-in Rechargeable Battery: The DualSense controller has an integrated rechargeable battery, eliminating the need for disposable batteries and providing a more environmentally friendly solution.
6. Integrated Light Bar: The light bar on the DualSense controller has been moved from the top to the sides of the touchpad, reducing battery consumption and offering a more refined look.
7. Touchpad: Similar to the PS4 controller, the DualSense features a touchpad on the front, enabling additional input methods for certain games and menu navigation.
8. Built-in Motion Sensors: The DualSense controller includes motion sensors like an accelerometer and gyroscope, enabling motion-based controls in supported games.
9. USB-C Charging: The DualSense controller utilizes a USB Type-C charging port, which provides faster charging and improved durability compared to older USB connections.
10. Wireless Connectivity: The DualSense controller connects to the PS5 console wirelessly, ensuring a seamless gaming experience without the need for cables.

These innovative features of the PS5 DualSense controller are designed to offer a more immersive and interactive gaming experience, providing players with enhanced feedback and control in compatible games.

What’s Next?

So, there you have it! We hope that this article has answered your question about how many controllers come with a PS5. As we mentioned earlier, the PS5 comes with one DualSense controller as standard, which is a great start for those looking to play solo games.

However, if you’re looking to play multiplayer games with friends or family, you’ll need to purchase additional controllers. The PS5 supports up to four controllers at once, so you can enjoy games with your loved ones from the comfort of your own home.

It’s worth noting that buying additional controllers can be quite expensive, with a new DualSense controller costing around $69.

If you’re on a budget, you may want to consider purchasing third-party controllers instead, which can be more affordable.

The post How Many Controllers Come With A PS5? (1 & 2) appeared first on IPEEWorld.